Ceramic frit glass
Source:     Author: bathroom-02    Publish time: 2019-11-08 17:58    555 Views
Ceramic frit glass also named Ceramic Coated Glass is produced by silk-screening, roller-coating or printing a frit with selected color and pattern onto the surface of the glass, then heat treating (tempering or heat strengthening), enabling the frit to firmly adhere to the glass surface and never fade.

Ceramic frit glass also named Ceramic Coated Glass is produced by silk-screening, roller-coating or printing a frit with selected color and pattern onto the surface of the glass, then heat treating (tempering or heat strengthening), enabling the frit to firmly adhere to the glass surface and never fade.
Feartures:
Long-term durability against frits fading and peeling
Variety of colors and patterns, outstanding decorative effect
The color and pattern are variable with enough options,Besides,it bears strong resistance against the color fading and influence of acid and alkali
The colors and patterns are customized
Various frit glass available with ordinary frit,translucent,metallic frit,mirror frit,gold frit ect by twice printing and multi-color overprinting
Sunlight shielding
Spandrel blocking
Specifications:
Maximum Size: 2400×4800mm (94”×188”)
Minimum Size: 150×250mm (6”×9 3/4”)
Thickness: 3-19mm (1/8”-3/4”)
Certifications:
China CCC Safety Glass Certificate (GB 9962, GB15763.2)
SGCC Certificate for safety glass (US) (ANSI Z97.1, CPSC16 CFR1201)
BS EN Kitemark Certificate for safety glass (UK) (BS EN 12600, BS EN 12150 and BS EN 14449)
Complied Standards:
Chinese Standard GB15763.2 Safety glazing materials in building-Part 2: Tempered Glass
ASTM C-1048 Standard specification for heat-treated flat glass: kind HS, kind FT coated and uncoated glass
ANSI Z97.1 Glazing materials used in buildings – Safety performance specification and methods of test
BS EN 12150 Glass in building. Thermally toughened soda lime silicate safety glass.
BS EN 12600:2002 Glass in building – Pendulum test. Impact test method and classification for flat glass.
BS 6206 Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings
Australian and New Zealand Standard AS/NZS2208 Safety glazing materials in buildings
Applicable range:
Special function of decoration is very popular in building’s interior decoration
Widely used for colorful glass furniture,home appliances like range hood ect.
Sometimes,when printed,people will use ultral clear glass(low iron glass) instead of common float glass to get the better color effect,because untral clear glass is a high-grade float glass with low iron and high transmittance(92%),it won’t appear green like common float glass,which will influence the final finished-product color after printing.
Overview of Ceramic Printed:
Ceramic Frit Glass – Ceramic frit is applied to the glass through a fine mesh screen with glass enamel before the glass is tempered or heat strengthened. On tempering or heat strengthening, the glass enamel fuses into the glass surface and becomes a permanent coating which cannot be damaged or removed by cleaning or scrubbing etc.
Silk-screened glass can be specified for both exterior and interior applications. When used on building exteriors, the painted surface must be protected from direct contact with the environment and is normally found in an insulating glass unit. Combining silk-screened glass with clear, tinted, Low-E, or reflective glass, can control light transmittance; reduce solar heat gain and its aesthetic and performance characteristics are enhanced.
Ceramic Frit Process:
Silk-screening involves washing the annealed glass and then the ceramic frit paint is applied to the interior (non-weather) side of the glass. Frit consists of tiny glass particles, pigments and various chemicals for the curing. Ceramic frit is fired within a tempering furnace to create a permanent coating. The glass is always either heat strengthened or fully tempered to prevent glass breakage due to thermal stresses.
Ceramic frit can be positioned in Face 2, 3 or 4 for optimum solar performance. The results are an increase in solar absorption on the interior glass ply and a lower shading coefficient. Silk-screening on these two surfaces becomes more apparent from the interior during nighttime conditions, which complements indirect interior lighting. Ceramic frit can be combined with clear or tinted glass substrates, as well as with high-performance coatings to reduce glare and decrease solar transmission.
Characteristics of Ceramic Printed Glass:
The coating is also not affected by moisture, oil, soaps, chemicals or detergents and retains its original appearance throughout the life of the glass.
Certain areas of application make it important to mask a part or whole of glass for privacy or hiding the background or enhancing the look of a product or for purely aesthetical reasons.
Light frit colors and certain pattern designs can cause enhanced brightness when viewed from indoors under certain daylight and background sky conditions, while dark frit colors will tend to reduce glare.
Applications of Ceramic Printed Glass:
Applications include transparent and translucent silk-screened glass for interior applications, including glass doors, partitions, handrails, glass ceilings, bathrooms, elevator walls and shower enclosures.
Ceramic frit glass used in curtain walls; point fixed or bolted glazing systems, shower installations, glass doors and partitions. The size, density and color would determine the opacity and shading whereas the variety of dots, squares, checks and patterns will give many design combinations to achieve the desired effect.
Latest Glass Processing Capabilities
CN Glass Processing Limited
Product
Article
Search
NameDescriptionContent
Set Homepage☆Add to Favorites
E-mail  
Password     Forget Password？
  Register